Beiträge von danielvieira

Der Wiederverkäufer verlangt viel ... hier im Forum haben sie mir beigebracht, wie man den Vin mit dem Arduino ändert.

Ich habe den Arduino mit der Diagbox verbunden und mit Diagbox 9.68 offline kann ich einige Dinge ändern, z. B. Sensoren aktivieren oder deaktivieren ... den Speicher entsperren, bevor ich die Änderung in der Diagbox bestätige. Da es sich bei meinem Auto jedoch um einen Canbus von 2004 handelt, funktionieren die uds-Befehle von der vlud-Website nicht. Dann kann ich die Sprache nicht ändern.

Wenn ich die Lime-Datei senden könnte, würde es meiner Meinung nach funktionieren.

aber da bin ich ein Laie. Ich wusste nicht, dass es eine modifizierte Diagbox gibt ... Ich habe darüber nachgedacht, Diagbox online mit der Fahrgestellnummer eines anderen Autos auszuprobieren, aber ich fürchte, es wird nicht funktionieren und ich werde Geld verlieren Mein Auto ist ein 308 und der AIO stammt von einem Citroen ...

Ich verstehe Sie, aber ich habe auch kein Interesse an einem Verkauf. Ich wollte nur versuchen, meinen AIO RCC zum Laufen zu bringen. Ich kann die Sprache nicht ändern und Datum und Uhrzeit werden nicht aktiviert.

Die Vlud-Änderungssoftware funktioniert nicht mit dem AIO, das ich habe. Wenn ich diesen Lime über Diagbox abspielen könnte, könnte ich die Sprache zum Laufen bringen ... und damit arbeite ich nicht ...

Es ist nur ein Hobby und ich möchte nicht den hohen Preis zahlen, den sie dort verlangen, wo ich wohne ...

Zitat von Mittns

Nur über einen Download via Diagbox.

Aus dem System selbst, kann es nicht gelesen werden.

Hallo, alles in Ordnung? Ich würde gerne mehr darüber erfahren. Kannst du mir helfen? Wird diese .cal-Datei über Diagbox online heruntergeladen?

Beispiel: Wenn ich eine Online-Telekodierung durchführe, wird die .cal-Datei dann automatisch auf das NAC heruntergeladen oder was auch immer das Multimedia ist?

Zitat von j23

just read again github few time with understanding

Code

:D91C:83:C0

Hello friend, how are you?

Now I understand this code... key :D91C refers to nac, key :83 refers to the service and okey :C0 refers to the id. being uds or kwp.

Could you explain to me what uds and kwp mean?

example, I would like to enter the injection calculator, how do I identify if it is usd or kwp?

And do the service key and ID work for all ECUs?

thanks.

I believe that with the vlud software there are more options to customize the aio.

But with the Diagbox and Arduino together you can enable some AIO settings.

Anything, just send them a message...

Download version 9.68 and you get into the Peugeot 208...

try all the 208 options... it won't recognize the vin, so you manually enter your vin and it will enter as 208.

Then it goes to the telematics box and it will say that the calculator is unknown, then it will ask you to select which calculator, and aio will appear.

Enter aio and you will be able to telecode.

To work, you need to open the obd2 connector on your diagbox and solder the arduino wires to it.

solder pins 3 and 8...

solder or splice the Arduino wires together with the diagbox wires..

Then you will enter the Arduino program which you use there and go to the part where you enter the code to send to the car.

and also enters the diagbox.

the two programs running together, each on a USB port.

After entering 208 and enabling some option in the diagbox, before confirming the changes made, you go to the Arduino program,

and type

>764:664

:D91C: 83: C0

This code will unlock the aio, and then you go back to the diagbox and apply the changes made in the diagbox.

I used the 208, but you can use any car that has the aio, just search in diagbox which car will appear in the aio... but it's tiring looking car by car.

in my car, when I enabled several options at the same time, the diagbox did not telecode, but when I enabled about 4 or 5 options at a time, the diagbox telecoded.

You use this program with Arduino, right?

[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino

Do you have the diagbox?

With the diagbox you can enable carplay android auto and mirror link and bluetooth.

Using the diagbox you can configure some things...

Brasil...

I thought it would be easier to get information about the aio in your country...

Here where I live there is little information and anyone who knows how to use it costs a lot. it is a shame...

just use the code that j23 gave...

>764:664

:D91C:83:C0

3BB0xxxxxxxxx

where is the x you put your vin... first you have to transform your vin to hexadecimal... just search for hexadecimal calculator on google...

Put your vin in capital letters.

This will insert your vin into the aio and it will stop beeping...

I mentioned the rest in the topic above.

Connect the Arduino to the diagbox and use version 9.68 of the diagbox, if you have the diagbox.

If you don't have the diagbox you will only be able to change the vin.

I couldn't change the language or time of the day, and the rear camera doesn't even work, but it can be used...

At least sound comes out and CarPlay or Android Auto works. What country do you live?

Zitat von caostr

Zitat von danielvieira

I'll try to put Win10 to test...

---

it's at 500mhz... and it's on pin 10, if I change it to 9 it gives an error message when sending the code >764:664

Hello Daniel, I have the same problem, were you able to solve it?

Hello budy, how are you? I managed to unlock the aio and partially move it... with the help of j23 who gave the code to include the vin the aio stopped beeping then I was trying to enable the reverse camera and found this video https://youtu.be /Xuj0Ro-YsO8?si=PogaN0q8gYddwFKt In the video the person is messing with the diagbox with the canhack together so I took my diagbox, opened the connector and put the wires on pin 3 and 8 and used the diagbox 9.68 and after changing a few parameters at a time I typed the unlock code into the arduino and I went back to diagbox to validate the changes and it worked!!! when I achieved this in version 9.68 I tried 9.91 and higher but diagbox did not open the parameters for change... it seems that from version 9.91 telecoding is only online in version 9.68 I telecoded offline... I believe that the vlud software has many other options than the diagbox... but for those like me who the vlud software didn't work, this option worked... I believe the vlud software doesn't work due to the car's can network with the aio I found the diagram arduino connection to convert the can network but I haven't been able to make it work yet. I accept that with the network converter the vlud software can work but I haven't been able to test it yet. Even if there is someone who can help with how to make the converter work, I would be grateful. but it's already been a lot of progress, canhacker linked to diagbox in version 9.68, I hope to help someone just as I was helped by j23.

Bonjour... quelqu'un connaît-il le brochage du connecteur quadlock de l'aio ? J'avais besoin de savoir quelle broche connecte la caméra arrière, mais je ne trouve pas de schéma de connexion... merci

Hello... does anyone know the pinout of the quadlock connector of the aio? I needed to know which pin connects the rear camera, but I can't find a connection diagram... thanks

the aio really doesn't telecode manually with the diagbox... is there a way to make the aio work with the can2004 network natively?

Zitat von j23

here your data to change vin

Code

>764:664
:D91C:83:C0
3BB038414434434E464E314747303232313036

Hello how are you friend? It worked my friend!!! I can't believe it... the beeper because of the chassis stopped beeping... I don't even know how to thank you!!! I am very happy to have received your attention and help!!!

I lack words to say thank you!!!

It just didn't pull the time and settings from the aio, but I now believe that I need to do the network converter can 2004 to 2010 so that the car pulls the date and time and other settings...

My AIO is from a Citroen and I use a Peugeot 308... after doing the converter I will try to enter with Diagbox to see if it releases the AIO configuration via DiagBox offline.

I thank you immensely from my heart... THANK YOU VERY MUCH!!!

hello again... friend... I was looking for the can adapter and I was looking at the website https://vlud.net/can2004.html but I couldn't find the connection diagram between the Arduino boards... do you know where Do you have a tutorial on the board connection diagram to help me?

Thank you very much friend. I'll test it tomorrow or Thursday and let you know how it goes... I really appreciate it! have a good night

this is my vin 8ad4cnfn1gg022106

I understand a little, sometimes Google translate changes some words and gives a different meaning to what we write... so sometimes it creates a little confusion...

I'm sorry but I didn't really understand your post 25 friend... I'll put it

>764:664

:D91C:83:C0

3BB0 is my vin number?

I thought this code was just to view the vin that was in aio

Ha cool... if you need any help... with anything I know, just send a message...

but I was talking to someone who knows how to code this nac and he said that it messed with the memory.

he charges for the service and I don't have money to pay for the service. I even thought about buying another multimedia to try to get the memory to test but I don't have the money left at the moment for that... maybe look with the Thor browser if you can find something on the web depp... I know there are people who know how do it but they don't share it and they charge a lot for the service... at least it's like that where I live.

Hello friend, how are you? I couldn't solve the problem... I ended up not trying anymore... I believe there must be some memory blockage but I couldn't find anything about it...

I'll try to put Win10 to test...

Zitat von szahtila

Check if CAN SPEED is set to 500kbps in the Arduino sketch. Also check if CS PIN CAN0 is set to 9 or 10 (try to replace those two numbers)

it's at 500mhz... and it's on pin 10, if I change it to 9 it gives an error message when sending the code >764:664