Beiträge von maszu

Ok. Works but idk exactly how.

Firstly I tried all (6) calibrations files for expert and all same construction like jumpy.

Calibration file for jumpy was first step forward. (Fixed colours)

I tried another calibration for rifter/berlingo but without result.

My wave is from an C4 cactus so I decided to uploaded calibration from this model. Perfect all problems fixed but I found new one… lines. Car size is different.

So I uploaded one more time jumpy.cal And this time view didn’t turned around. (Lines fixed)

Parameters stayed all time same. I only uploaded new calibration files.

Can I leave this calibration from Jumpy? If it’s twins productions.

I found one .cal from Expert Wave 4, but nothing changed. I have wave 3 only fw is from 4. Maybe here is the problem ?

I cannot use .cal from Traveller, because Traveller have one door/ klappe . In Expert I have 2 doors.

Today after work I will check traveller/proace/jumpy calibrations file and we will see.

After .cal uploaded should all settings restored to factory ?

When you say „Einstellung via Arduino” you mean with this software?

I should all parameters restore from another Expert. Because my wave is retrofitted. I cannot roll this view. Maybe I searching in wrong module “212A”. I checked wiring (with second wiring cable) and it’s should be okay, because all problems stays.

Paar verschidene probleme.

1. Bild ist echt schwach.

2. Bild ist umdrehen. In Zoom sind Seite falsch. In normal ist komplett umdrehen.

3. Farben sind falsch blau ist grün, rot ist violett, orange ist rot. (Kamera defekt?)

Für Original Blende und Kamera (Gebraucht beide) ca. 120€

In Quadlock ist Video + und Video - angeschlossen aber hinten ich habe noch nicht gefunden. Das wegen ich muss neue Kabel verlegen. 10€ + T Abzweigverbinder

Diese Woche kommt noch Stecker für Kamera. 12€

Bleibt Codierung mit Arduino.

1. In meinem quadlock sind pin 16 und 17 schon Kabel drin. Das bedeutet, dass kabelsatz für rfk schon vorbereitet ist?

Stecker hab ich nicht gefunden.

2. 12V & GND soll ich von Pin 11&22 nehmen oder von Rückfahrt Licht nehmen?

Zitat von rzkw

Zitat von mva905

Danke für die Info, genau das habe ich gesucht! Probiere ich demnächst auch aus.

Danke für die Erinnerung - ist bei mir auch noch fällig ...

(Das letzte Kartenupdate hatte funktioniert, mit der Firmware gab's leider Probleme)

Ich empfehlen wifi connection einstellen. Dann Unit kann UpdateInfo.xml selbst herunterladen.

Karten v14 wave 4

Neue Karten für Wave 1

Zitat von Mittns

You just have to take a different chassis number or have a look here.

I always check this topic.

Zitat von Mittns

You have to configure the logos.

But remember that not all firmwares have all logos.

For example, mine doesn't have any pictures of the 308 pre-facelift model as it didn't originally appear in the pre-facelift model.

So I take the pictures of the 308 facelift.

Which zone is this ?

I made telecoding used Diagbox online, but for me arduino give more option.

I have access to Diagbox telecoding. It's possible to add new wave 3 to my car? I mean for my VIN in peugeot app or mittns toolbox i can find update file only for my old nac wave 1.

2nd before nac swap in peugeot app i had my car picture, now i have standard picture (contours 508).

I started download new sw on PC and speed is ca 110kB/s. I started download in same time on my phone and download speed is ca 1,6MB/s. It's little tipp for you guys.

I have schematic. I think it's right. I need also plug, but have no idea where I find it.

Still remains Problem with camera attachment.

I found 2 Problems.

1. I don't have attachments.

2. I have only little plug. I need with more pins and probably with 5 Kabel not 3.

Hi,

After successful upgrade from Wave 1 to Wave 3/4 it's comes time to new retrofitting.

I have rain and lights Sensor. For now 😅

I bought cvm 3 camera. I wanna try to add sign recognition, lane assist, active city break

Have anyone Tipps for me?

Whitch tools are needed?

I can NAC coding with Arduino.

BSI coding is needed? Can I do this with diagbox on VC or Arduino?

Now all works perfectly.

I think so 🤣

Thank you guys.

Zitat von Mittns

I mean, you could try it.

Just download both versions and try out the latest version first, than report your experience.

From oldest 3xx to newest 4xx without problems. I used upgrade file with Update ID (001315031622734386). This upgrade included map file but if I had all files on stick upgrade didn't started. So I deleted maps folder and did sw upgrade. Right now I update map-eur files to 12.0.0.

Zitat von Mittns

You mean nac or speedo display?

Don't say "top display" that confuses.

I mean NAC Display. Sorry 😊

I'm so dumb 😨 it's my first French car and now I realized consumption values is only visable when I ride faster than 30 km/h. When I tried to check it I was on 30 Zone. But still I didn't Found Manu with consumption on top display, I my sure that was in Wave 2.

Zitat von Mittns

Did you change something in the BSI?

No, I didn't change anything.

I think something is not enabled in parameters.

Maybe you have tipp where should I check. In top display I can't check consumption values too.