Hello,
I would like to virgin or rewrite immo code on electric steering clock.
part information:
98 159 053 80
36.448.200
eeprom 95040
I have read the eeprom bin file by Carprog and Iprog.
If someone have virgine file, or any way to virgin. Would you please share with me.95040_ 4b43313134363437.zip
Alles anzeigenHi everyone, I'm new here....
I drive a Peugeot 5008II Bauj. 2018 which is connected to WIFI. Now I wanted to bring the car to the latest update..
I have successfully updated the map material to 23.0.0-r0, only the old system version (21.05.82.12_NAC-r0) i.e. WAVE 2 which is on it can not be updated to the latestversion_21.08.87.32. I have already tried everything that is in here, (several sticks, with license and without, with update info and without) he always writes me that the version is not compatible with the hardware. My last chance is your Mittns.Tool which I have to earn as a newbie. Now I hope that I can download the tool soon..
Greeting Titus
Hello
You should ensure some conditions meet, such as: normally I use USB 32Gb,
format FAT32 and the size is 16 kilobytes, engine running, connected to wifi.
if all condition are meet, if you still fail, then you should come to authorises repairer. They should send a ticket to helpdesk.
or, you may try update the firmware step by step. I saw from 21.05.82.12_NAC-r0 to 21.08.87.32, you still can update:
21.05.90.42_NAC-R1
21.06.47.34_NAC-R0
21.07.16.32_NAC-R0
21.07.67.32_NAC-R0
21.08.22.32_NAC-R1
21.08.24.12_NAC-R1
21.08.25.12_NAC-R0
21.08.84.12_NAC-R0
I go around and see the link here: https://sites.google.com/view/…tem/nac/wave-2?authuser=0
Hello
hope it can help you, configuration in sheet 1, communication in sheet 2
Alles anzeigenIt is done !!!
The PDC is now working flawlessly
It was due to the settings in the zones
- 2104-> The wrong audio export (Generation 2) was set here-> Changed to Generation 3
- 2100-> Here the parking sensors were set to "function present at front, rear ans side"-> which actually makes sense but is obviously still wrong
-> changed to
- 2108-> Type of obstactle dedection system "front+ side , rear + side" > was also changed to the "default"
I will now observe for a few more days, if really everything works-> in general the conversion from Wave 2 to Wave 4 in a 3008 (with some manual adjustments in the calibration and the configuration) was successful !!
The next project ->the activation of "Grip Control" isalready in the starting blocks-> But I open a separate topic for this (so as not to overload this thread)
For me, this topic is now done and can be
closed
Thank you very much for the great support !!!!!!
Hello
Would you please share with me how to manual adjustments the calibration of NAC wave2?
I have wave2: NAC EUR 19W2 (W2_EU_B3_HW19). By the way, your wave4 is non HD screen, is it?
Alles anzeigenget no further
BSI "clicks" when 12V is present.
However, Diagbox does not find a chassis number.
If I enter any, go to troubleshooting, my VCI also "clicks", then the message "No dialog available" comes up for each control unit
Is that correct if I build the BSi on the workbench?
Where can I get the circuit diagrams?
Thanks
Hello,
hope it can help you
Alles anzeigenYou've to change the following setting in Zone 2133
- LVDS #1 configuration to "1"-> so my screen worked !!
best regards
and you should use the Wave2 Version->wave 4 only works with 10" HD Display !!
- 3008_RESTYLED-9694684380.cal -> if you´ve Facelift model
- 3008-9693621880.cal -> if you've the first model
Your Wave4 has to be a "NON-HD" Version otherwise it won't work !!!
My car using touch screen 8-INCH and NAC wave2
I already have NAC wave4 here, I intend to install into my car and still using 8-INCH.
Alles anzeigenFind zones 011B and 0123 in the working calibration file.
When you have found the zones, copy the complete lines into the other calibration file or replace the complete line.
The zones should be somewhere around line 21 and 29.
The zones start from the 15th digit.
Choose a line and go right to the 15th digit, from there the 4-digit zones start.
Each zone consists of 2 hexbytes (4 characters).
Otherwise, copy both files here.
Hello,
I have same issue, I would like install NAC wave4 replacement NAC wave2.
I have coded the calibration file 9694318880 into wave4 and screen is black.
I have two calibration 9694318880 is wave2, and 9695350580 wave4.
I till cant install NAC wave4 for car using NAC wave2.
Alles anzeigenHallo an alle,
ich würde mir gerne eine Mittelarmlehne nachrüsten. Leider ist unter meiner FIN des Fahrzeuges keine vorgesehen und ich finde nur die "globige" oder normale Nachrüstsätze.
Kennt einer die Teilenummer der Mittelarmlehne eines 208GTI oder hat vielleicht sogar eine rumliegen 😅?
Grüße aus Nordhessen
Hello,
Hope it can help you.
Download the firmware again extract it with Winrar.
Format the pendrive slow in Fat32 Clustersize 16Kb
I use for the firmware 4Gb are 8Gb usb2.0 sandisk are kingston
Look if this is the solution
Hello,
I have try download agian the firmware and license, change new pendrive (ensure FAT32, 32GB). I also tried to use the "file decompression application" to extract and combine the file into pendrive.
However, problem remain same.
By the way, the previous firmware version of this telematic unit is 21.05.90.42_NAC-r0
Hello,
I have tried update firmware version 21.08.87.32_NAC-r1. However, the unit load the sw until half then stuck at this stage.
Screen request remove the USB stick, then the screen status "software loading on deman.." until now.
Would anyone advise me any idea to solve this problem?
