Beiträge von byrrt

I provided the part number, this BSI is found in many cars. If someone has the opportunity to check by VIN, I will be happy to provide it, but I have a Toyota, so it probably won't work on the Peugeot forum.

I'm asking, hoping that someone may have a description of this connector (60-pin yellow plug marked EH2) - I don't need anything else. Access to a paid Toyota (or PSA) service can always be purchased..

Zitat von Mittns

You need the pinout of your bsi.

Where can I get the BSI pinout number 9832880280? I'm looking for and can't find any diagrams. I mean access to the CAN INFO bus. It seems to be on the EH2 connector (yellow).

There is also nothing about this cover in the Polish language version - does anyone know its part number?

Zitat von Mittns

In the BSI there's a parameter, where you can set it so that im S&S can disabled with touch and button.

If there's no plug, than you have to wire it yourself to the bsi.

I was hoping that there would be a plug because in Rifter versions with a basic radio there seems to be a button installed, so I hoped that the harnesses would be the same. Too bad there's no plugin.

Zitat

There's no parameter for disabling permanently.

But why disabling it?

S&S works good and it's better for the environment.

The system irritates me, sometimes the engine turns off for literally a second and then starts again, causing unpleasant vibrations when starting. I believe that it only causes unnecessary wear and tear of engine parts and I am convinced that it will not protect the environment.

Thank you for your answer

Does anyone know if it is possible to add a Start/Stop system button to the Toyota Proace City Verso, which probably never had this button but was installed in some versions, e.g. Rifter?

Currently, to disable the Start/Stop system, I have to do it via the radio menu. I would prefer to disable this system permanently (to set the default value to disabled) - is it possible to do this via DiagBox?

I even removed the plastic covering the steering column to see if there was a plug for this button, but I couldn't find it.

Zitat von Toyo

Hi zusammen,

gestern wurde das Navi in meinem Toyota Proace City Verso ebenfalls einem Update auf Sys: 44.07.05.22_NAC-r0 mit Karten: 15.0.0 unterzogen.

Leider wie bereits mehrfach beschrieben ebenfalls teilweise gelbe Bereiche auf dem Bildschirm. Die Option "Emissionszonen" hat auch hier keinen Einfluss.

Kommt besonders gut bei Nachtfahrt

Funktioniert Android Auto nach diesem Update bei Ihnen?

In fact, the answer has already been given, but I would like to ask before updating. Does the latest version 44-07-05-22 work flawlessly in NAC in Toyota Proace City? Mainly, I'm asking whether Android Auto will work. I currently have the 2020 version and wanted to upload something newer.

Does Android Auto already work in the latest FW for NAC Wave 4 (44/07/05/22)? Does it make sense to update from the first version (42-01-72-32)?

Hi,

I was also looking for such a cover for my Toyota and couldn't find anything.

It warms up tragically slowly, but everything works.

Zitat von rui.saraiva

byrrt: On Wave 3/4 systems, both USB ports should work for AA and CP.

I connected the USB cable and it works, but only as mass storage - AA does not run on second port.

Zitat von edu_chirimoya

Zitat von byrrt

The system I have is NAC

Then you can forget about the Engieniering Mode. This is only present in RCC.

Oh ok, I understand. Thank you! What about the support for two USB ports in the NAC system?

Today the purchased cable with the appropriate connectors arrived and I will try to connect it to check how the second USB works.

Zitat von edu_chirimoya

The password is the same for all RCC systems, no matter which car brand.

More important is: which system do you have?

Thanks for showing interest. The system I have is NAC but I don't know exactly which one..

Version show in menu: 42.01.72.32_NAC_-r0 from 2020-03-18

In Rifter, the service menu is called Engginerring mode, in my case, after holding the music button for 6 seconds, it enters "Expert Mode" and asks for the code. The code 7503900 that I found for Rifter does not match.

Zitat von Tomasz

You don't have to. The port is active.

Can you use MP3 music from a pendrive on one USB port and Android Auto on two other USB ports at the same time? In Peugeots this seems to be impossible by default.

I have a 2020 Toyota Proace City Verso. To use the second USB port (after connecting the appropriate cable), do I need to activate the USB HUB in the secret menu on the radio? I tried to enter expert mode but the password is not the same as in Peugeot Rifter. I looked for the password on the internet but couldn't find it anywhere.

I'm sorry that I'm writing in English, but I don't know German - I don't want to write any nonsense.