Beiträge von chunchai

Zitat von Mittns

Not by heart.

I first have to check what Diagbox sets for each selected setting.

If you have diagbox, than you can easily check it yourself.

Just set a battery type and select "coding".

Then you can see, which zone is selected and which parameters are set.

Must be something like 2E2333xxxxx

2E = Writing zone / 22 = Reading zone

2333 = Zone

xxxxx = individual parameters

Alles anzeigen

Yes ,I have Diagbox V9.150

But it could not configure BSI via Diagbox for the car model after 2015.

My car is 5008 GT P87 with BSI-2010EV.

I try to check the attribute from specific tools.

Thanks.

Zitat von Mittns

Zitat von chunchai

very useful info, my battery vendor told me it not necessary to change from EFB to AGM.
Because it's the same charge mode. is it correct ?

No, it's not correct.

There's a setting for the battery type in diagbox because they have different charging requirements.

AGM batteries typically require a slightly lower charging voltage and more precise charge control to maximize their lifespan.

EFB batteries are somewhat more robust and can tolerate slightly higher charging currents under certain conditions.

Hi Mittns

Thanks for your answer.
Do you know what zone is for charge mode of BSI?

I just found zone
2333 Battery type

2334 Battery estimation type (SOC)

Very appericate it .

Looks pretty good in the front. How about it in the back look from outside ?

Thanks.

very useful info, my battery vendor told me it not necessary to change from EFB to AGM.
Because it's the same charge mode. is it correct ?