Beiträge von funnycool

    I am not sure that NAC Wave2 has only Carplay without AA. However, there is Mirrorlink on my 3008. I just export config. on my 3008. I will capture on my 3008 later.


    My 3008 doesn't have Android Auto

    If your 3008 doesn't have AA, you will most probably have an RCC Wave1 headunit. If so, I am afraid that you cannot do anything but change the headunit into a RCC Wave2 as the Wave1 doesn't suppor AA nor Carplay.

    Thanks for your response. My 3008 has Carplay. My 3008 has NAC Wave 2 as I usually update NAC Wave 2 firmware. Current version is 21.08.87.32_NAC-r1.


    Thanks for your response.

    My friend has the same 3008 as mine. He has paid to someone that can update Park Assist and Auto Headlight Dipping. He shared with me that they just update thru Laptop and cable, not update any hardware.


    Share some pictures:


    Kích hoạt tính năng ẩn trên Peugeot 3008 & 5008 | Thảo Luận | Otosaigon


    Kích hoạt tính năng tự đỗ xe trên 3008/5008 | Hỏi/Đáp Kỹ Thuật | Otosaigon


    Yes. I guess that some features have been disabled by PSA.

    Hi all,


    I have read thru this thread, and also search on this forum about how to activate/deactivate function on my 3008.


    I appreciate that you can help to guide me what tools/ application need to customize on my 3008.


    My 3008 doesn't have Android Auto, Parking Assist and Auto Headlight Dipping. I need to activate that functions.

    Ich kann zum Beispiel die 2 Funktionen (siehe Bild) de- & aktivieren oder beim Nac Android Auto aus- & einschalten oder Fahrgestellnummern ändern.


    it's very complicated to understand all technical.

    Hab bereits eine funktionierende Anwendung dafür geschrieben, weil's Spaß macht. ^^

    (Auch mit Filter ^_^ )


    Thanks a lot.

    1. Kraftstoff: Petrol
    2. Kraftstoffart: E5
    3. Kilometerstand: 15.560km
    4. Gefahrene Kilometer: 394km
    5. Durchschnittsgeschwindigkeit: 35km/h
    6. Strecke: 90% urban, 10% highway
    7. Motor/Hubraum/Getriebe: 165PS, 1,6l, Automatic
    8. Wie berechnet: App
    9. Verbrauch: 10l/100km

    Kann man leider so nachlesen, der Motor muss laufen. Somit kann das NAVI Update im Fahrbetrieb machen, das Firmware-Update leider nur im stehenden Betrieb mit laufendem Motor. Geht der Motor aus, stoppt das Update

    Das Firmwareupdate geht einwandfrei auch während der Fahrt - einzig es können Fehlermeldungen kommen, und manche Anzeigen (z.B. Schildererkennung) stimmen nicht.

    Aber sämtliche Systeme zum sicheren Fahrbetrieb funktionieren ganz normal.

    Ich habe bisher alle Updates (Firmware und Karten) während des Fahren gemacht- kein Problem!

    OH!!! NO NO NO!


    I don't think that will be safe.


    During Firmware update, the engine must be on / not driving until updating done.

    In my experience with my car, that is not worth when you use ceramic seal to cover whole your car. I think that you need to consider:

    - Total fee for ceramic seal. The car is needed to cover 1st time. After that, every 3 months, you need to check the car paint and maintain ceramic seal.

    - After using ceramic seal, that is very little difference.

    - It cannot be protected your car paint as you pay for

    Instead, I am using:

    - Every week, I wash my car.

    - Every month, I use Meguiar's WAX (there are some product for wax with ceramic)

    - If there are some scratch, you can using polish at Detailing.

    That will be cheaper and difficult to compare with Ceramic Seal

    Ich bekommen meinen 3008 Hybrid 4 zwar erst am kommenden Freitag. Da ich die FIN schon habe, wurde die App gleich ausprobiert. Und siehe da, es liegen mehrere Updates an. Meine Frage. Welches Speichermedium brauche ich da-USB-Stick? und wieviel Kapazität sollte der haben?

    You need:

    - 1 USB drive with 32Gb.

    - Format with FAT32

    - Download firmware thru Peugeot Update Application on Win and Mac

    - Extract by 7-Zip is better.