How to connect BSI to abs pump?

    Hi everybody ,


    I have got EL5 BSI . I working on table without any problems.

    I want to connect my ESP90 unit(9808958280) to bsi but Diagbox not shown. I cant connect to esp with arduino either.

    I have got esp and bsi connection scheme. But i cant contact to esp.


    How can i connect to esp on table?






    It would be helpful if you tell us, which pins do you connected to the abs pump.


    Do you have a pinout with the designations from the pump and list it here?

    Although I provided all the connections according to the specified scheme, unfortunately I could not get any results.


    By the way, when I connect the ABS pump to the vehicle, there is no problem. I can see it directly over the DB.


    Sorry, the attached ABS file is in Turkish.



    a" 46-track black socket

    End number Description

    1 Plus supply of the electric motor of the hydraulic pump to the distribution battery

    2 Supply of right rear brake caliper motor

    3 Feed return of the right rear brake caliper motor

    4 CAN HS 1 High

    5 CAN HS 1 High

    6 Unconnected end

    7 Left front wheel speed signal

    8 Unconnected end

    9 Unconnected end

    10 Unconnected end

    11 CAN HS 2 High

    12 Feed return of the left rear brake caliper motor

    13 Supply of left rear brake caliper motor

    14 Electrical chassis

    15 Electric parking brake 2 actuation

    16 Electric parking brake 4 control

    17 Unconnected end

    18 CAN HS 1 Low

    19 CAN HS 1 Low

    20 Unconnected end

    21 Right front wheel speed signal reference

    22 Right rear wheel speed signal reference

    23 Left rear wheel speed signal

    24 Left front wheel speed signal reference

    25 CAN HS 2 Low

    26 Right front wheel speed signal

    27 Unconnected end

    28 Unconnected end

    29 Unconnected end

    30 Distribution battery positive supply of electronic control unit

    31 Electric parking brake 1 control

    32 Electric parking brake 3 control

    33 Unconnected end

    34 Status assurance wired information of vehicle movement

    35 Information about vehicle speed

    36 Remote control brain standby information

    37 Right rear wheel speed signal

    38 Unconnected end

    39 Left rear wheel speed signal reference

    40 Unconnected end

    41 Brake fluid level information

    42 Unconnected end

    43 Unconnected end

    44 Unconnected end

    45 Unconnected end

    46 Electrical chassis



    Zitat von akn33

    Although I provided all the connections according to the specified scheme, unfortunately I could not get any results.

    This isn't a helpful answer.

    It's also possible that you made a mistake with the pin connection.

    On the photo you can't see the pins, that's why i ask you, if the connection is correct.


    The schematic says you need pin 5, 11, 19 and 25 for Can and 1+30 for 12V and 14+46 for GND.

    (Maybe also Pin 36 on the pump)

    Are these pins correctly connected to the pump?


    If yes, in my opinion it should work.

    At least, you should get a response with arduino.

    Of course, this only works if you enter the correct ID and you send a frame which the control unit can respond.


    What does Diagbox show when you list the ECUs?

    "Unknown" or "connection error"?

    Hi,


    I did try again. This table is my pin out scheme from psa sheme.


      BSI LEXIA ABS\ESP
      60V NR P10 8  
      60V NR P8 3  
      60V NR P5 5
      60V NR P3 19
      60V NR P46 11
      60V NR P44 25
      60V NR P41 36
      60V NR P15 6  
      60V NR P13 14  
      16V BE P2 16  
      16V BE P3 1  
    +12V 2V 1+2 1+30
    GROUND 32VNR P32 or 60VNR 24P 4+5 14+46


    I still couldn't connect.


    Communication error. :(


    Hmm, strange. :/

    I don't know what to do next since I haven't tried it yet by myself.


    Maybe the BSI is not compatible?

    On the other hand, you should be able to connect to the Arduino.


    Maybe the pump ecu is on standby?

    akn33

    You want be able to communicate with abs unit because you have not connected the ignition on switch on bsi they are on the blue plug i will check and tell you.

    You can communicate with bsi even if you don’t set ignition on because it’s a feature when you lost your car keys .

    Thema
    BSI auf der Werkbank aufbauen
    Hier zeige ich euch, wie ihr euer eigenes kleines Setup für die Werkbank bauen könnt.
    Warum? Warum nicht?! 8)

    Eigentlich nur aus Spaß und um alle kommerziellen Verkäufer ein bisschen zu ärgern, die andere Leute mit überhöhten Preisen abzocken wollen.
    Natürlich dient es auch dem Forschergeist und zum lernen, wie es funktioniert.
    Denn am Ende ist es gar nicht mal so schwer, werdet ihr merken.


    Was kann ich mit so einem Setup machen?
    Ganz einfach!
    Ihr könnt damit beispielsweise ein Navigationssystem…
    Mittns


    60V BR Pin 13 to Pin 32 or just 12V to Pin 32.

    see thin post it help me to work !!!



    Thema
    BSI auf der Werkbank aufbauen
    Hier zeige ich euch, wie ihr euer eigenes kleines Setup für die Werkbank bauen könnt.
    Warum? Warum nicht?! 8)

    Eigentlich nur aus Spaß und um alle kommerziellen Verkäufer ein bisschen zu ärgern, die andere Leute mit überhöhten Preisen abzocken wollen.
    Natürlich dient es auch dem Forschergeist und zum lernen, wie es funktioniert.
    Denn am Ende ist es gar nicht mal so schwer, werdet ihr merken.


    Was kann ich mit so einem Setup machen?
    Ganz einfach!
    Ihr könnt damit beispielsweise ein Navigationssystem…
    Mittns

    akn33

    If you are using a delphi bsi El3 or El5 then on the blue 60 pin connector short pin 32+33 for ignition on . If not then let us know which one you are using continental or Valeo .

    To use org VCI you need also connect pin1 obd and other can 6-14 pin...

    Hi. Was it possible to connect to esp/abs 90 + bsi? I put together a diagram on the table and I also can't connect

    @akn33 Hi, did you manage to connect to esp90?Hi, did you manage to connect to esp90? I can't do it, help me?

    2.jpg  3.jpg

    Siberiak No i didnt manage to connect. It is need engine ecu when connecting.

    Why do you want to connect on abs module ? You can only modify config and upload new software nothing else .

Jetzt mitmachen!

Hey! Es scheint, als ob Dir dieser Austausch gefällt, aber Du hast bisher noch kein Benutzerkonto erstellt. Mit einem Konto kannst Du über neue Antworten informiert werden, Foto's in unsere Galerie hochladen, unsere Tools nutzen, anderen mit einem „Gefällt mir“ danken oder selbst dabei unterstützen, anderen zu helfen. Gemeinsam können wir dazu beitragen, diese Community zu etwas größerem zu machen.

Benutzerkonto erstellen Anmelden